Access |
Title |
Author |
Source |
| 2006016 |
How (Proper) Blast Cleaning Averted a Naval Conflict |
Michel Cardon |
TSP Vol 20 / Issue 2, Spring 2006 |
| 2006012 |
History of Shot Peening Specifications |
Jack Champaigne |
TSP, Vol 20 / Issue 2, Spring 2006 |
| 2005109 |
History of Shot Peening Specifications |
J. Champaigne |
Conf Proc: ICSP-9 (pg 354-359) |
| 2003043 |
The Development of Roto Peening |
Shot Peener Staff |
TSP, Vol 16 / Issue 4, Winter 2003 |
| 2001014 |
The Little Book on Shot Peening |
Jack Champaigne |
Electronics Inc, The Shot Peener |
| 1999008 |
Shot Peening - Past, Present and Future |
G Nachman |
Conf Proc: ICSP-7 (pg 1-4) |
| 1998036 |
Factors by Which Shot Peening Influences the Fatigue Strength of Parts |
Horace J. Grover |
TSP, Vol 12/Issue 2, Summer 1998 |
| 1993055 |
A Tribute to Benjamin Chew Tilghman |
H.J. Plaster |
Conf Proc: ICSP-5, (p. 2-9) |
| 1987062 |
Optimum Peening Intensities |
Fuchs, H. O. |
Conf Proc: ICSP-3, (p.639-646) |
| 1987015 |
Development Of Mechanical Surface Strengthening Processes From The Beginning Until Today |
Kloos, K. H. and Macherauch, E. |
Conf Proc: ICSP-3, (p. 3-27) |
| 1986159 |
Short History of Steel Shot and Grit by Ervin Industries |
Einar Borch |
Ervin Impact |
| 1986062 |
Approximate Analysis For Optimizing Prestress Treatments |
Fuchs, H.O. |
ASTM: Report STP 1004, p. 13-20 |
| 1986022 |
Shot Peening |
Fuchs, Henry O. |
Mechanical Engineers Handbook, pp 941-951 Chapter 32 |
| 1986017 |
Shot Peening Stress Profiles |
Fuchs, H. O. |
Metal Improvement Company, Sept. 1986 |
| 1984011 |
Defects And Virtues Of The Almen Intensity Scale |
Fuchs, H.O. |
Conf Proc: ICSP-2, (p. 74-78) |
| 1982017 |
The Effect Of Self Stresses On High Cycle Fatigue |
Fuchs, H. O. |
Journ.of Testing & Evaluation,Vol.10,No.4,p.168 |
| 1981137 |
"History of Shot Peening" by P. E. Cary |
H. O. Fuchs |
First International Conference on Shot Peening |
| 1981077 |
The Strength Of Shot Peened Parts, Design Calculations And Specifications |
Fuchs, H.O. |
Conf Proc: ICSP-1, (p.323-332) |
| 1979012 |
What You Have Always Wanted To Know About Shot Peening |
Whinney, C. D. |
SME: Tech. Paper MR79-766 |
| 1973014 |
Special Performance of Transmission Parts by Shot Peening |
Straub, John C. |
SAE 730800 |
| 1972029 |
Using Fatigue Information In Design |
Grover, H. |
SESA, Vol. XXIX, No. 1 |
| 1966031 |
Shot Peening in Spring Design |
Straub, John C |
Springs October 1966 |
| 1966013 |
The Merits Of Shot Peening |
Kurz, William W. |
Production, June 1966, p. 107-111 |
| 1964006 |
The Residual Stress Explanation of Fatigue Failures in Mechanical Parts |
Almen, John and Black, Paul |
ASTM |
| 1964003 |
Shot Peening In Gear Design 1964 |
Straub, J. C. |
American Gear Mfrs. Assoc., No. 109-13, June 1964 |
| 1964000 |
Application Of Shot Peening |
Almen, J. O. |
p. 20-40 thru 20-49 |
| 1963004 |
Shot Peening Of Springs |
Fuchs, Henry and Bickel, Paul |
Springs, May 1963, p. 16-20 |
| 1963000 |
Forecasting Fatigue Life Of Peened Parts |
Fuchs, H.O. |
Metal Progress, May 1963 |
| 1962005 |
Shot Peening - Theory |
Straub, J. |
AMGA Meeting, May, 1962 |
| 1962004 |
Shot Peening - History |
Hawkinson, E. |
SAE ISTC Divison 20, May 1962 |
| 1962003 |
How, When And By Whom Was Mechanical Prestressing Discovered |
Bush and Almen, Danse and Heiss |
SAE Division XX Presentation |
| 1962001 |
History And Theory Of Shot Peening |
SAE |
SAE ISTC Div. 20 meeting, May 1962 |
| 1960001 |
Choosing The Optimum Method, Intensity And Coverage Of Shot Peening |
Straub, J. C. |
SAE: SP-181 |
| 1959004 |
Techniques Of Surface Stressing To Avoid Fatigue |
Fuchs, Henry O. |
Metal Fatigue, McGraw-Hill '59, p. 197 |
| 1958005 |
The Effect of Residual Stresses Induced by Strain-Peening upon Fatigue Strength |
R. L. Mattson, J. G. Roberts |
General Motors Corp GMR-190 |
| 1957006 |
The Story Of Shot Peening |
Leghorn |
ASNE, November, 1957 |
| 1957003 |
Shotpeening Effects And Specifications |
Fuchs, Henry O. |
ASTM; Tech. Publ. No. 196 |
| 1956002 |
How Shot Peening Improves Strength |
Grover, H.J. |
SAE: Vol. 64, Nov. 9, 1956, p. 28-30 |
| 1954013 |
Factors By Which Shot Peening Influences The Fatigue Strength Of Parts |
Grover, Horace J. |
SAE: 540138 |
| 1954001 |
Effect Of Shot-peening Variables And Residual Stresses On The Fatigue Life Of Leaf-spring Specimens |
Mattson, R.L. and Coleman, Jr.,V.S. |
SAE: Trans. 1954, Vol. 62, p. 546-556 |
| 1953007 |
Shot Peening In The Design Of Gears |
Straub |
AGMA, June, 1953 |
| 1953005 |
Residual Compressive Stress Strengthens Brittle Materials |
Almen, J.O. |
Product Engineering, July 1953 |
| 1953004 |
Miscellaneous Abstracts - Nine Articles |
|
Production: June 1966 |
| 1953000 |
Brittle Structural Failures |
Almen, J.O. |
Product Engineering, April, 1953 |
| 1952007 |
Torsional Fatigue Failures |
Almen, J.O. |
Product Engrg., Sept.'51,Vol.22 & Mar.'52,Vol.23 |
| 1952001 |
Effects Of Residual Stress On Rolling Bodies, Appendix I |
Almen, J. O. |
Elsevier Publ.,Roll.Contact Phenom., p. 400 |
| 1951005 |
Shot Peening As A Factor In The Design Of Gears |
Straub, J. c. |
Mechanical Engineering, Vol. 73 |
| 1951003 |
Fatigue Failures Are Tensile Failures |
Almen, J.O. |
Product Engineering, March 1951, po. 101-124 |
| 1950001 |
Fatigue Weaknesses Of Surfaces |
Almen, J.O. |
Product Engineering, Nov. 1950, p. 118-140 |
| 1948013 |
Shot Peening - Designers Guide to the Process, its Applications |
Fuchs, H.O. and Hutchinson, E.R. |
Machine Design, Vol. 30, Feb. 6, '58, pp. 116-125 |
| 1948006 |
Trapped Stresses |
Fuchs, H. O. |
Machine Design, July, 1948, p. 114 |
| 1945001 |
Mechanical And Metallurgical Advantages Of Shot Peening |
Horger, O.J. |
The Iron Age, Mar. 29 and Apr. 5, 1945 |
| 1945000 |
Effect Of Shot Blasting On Physical Properties Of Steel |
Mattson, R.L. and Almen, J.O. |
I,OSRD,No.3274;II,OSRD No.4825;III,OSRD No.6697 |
| 1944005 |
Shot Blasting |
Clark, H. H. |
Steel, Feb 28,1944 |
| 1944000 |
On The Strength Of Highly Stressed Dynamically Loaded Bolts And Studs |
Almen, J. O. |
SAE Meeting, Detroit MI, Jan 11 1944 |
| 1943004 |
The Useful Data To Be Derived From Fatigue Tests |
Almen, J. O. |
Metal Progress, August, 1943, p. 254 |
| 1943003 |
Shot Blasting To Increase Fatigue Resistance |
Almen, J. O. |
SAE: #430143, Trans. July, 1943, Vol. 51, No. 7, p.248-268 |
| 1943002 |
Peened Surfaces Improve Indurance Of Machine Parts |
Almen, J. O. |
Metal Progress, Vol. 43, Feb. 1943, p. 209-215 |
| 1943001 |
Endurance Of Machines Under A Few Heavy Loads |
Almen, J. O. |
Metal Progress, September, 1943, p. 435 |
| 1943000 |
Common Failures In Common Machne Parts |
Almen, J. O. |
Metal Progress, May, 1943, p. 737 |
| 1941003 |
Facts And Fallacies Of Stress Determination |
Almen, J. O. |
SAE Journal, Vol. 5, No. 2, February, 1942 |
| 1937001 |
Durability Of Automobile Gears |
Almen, J. O. and Straub, J. C. |
Automotive Industries, Sept. 25 and Oct. 9, '37 |
| 1927002 |
The Work Hardening Of Steel By Abrasion |
Herbert |
Engineering, Oct. 1927 |
Revised February 15, 2008
