1999062
|
Single Piece Wing Utilization Via Advanced Peen Forming Technologies
S Ramati, S Kennerknecht, G Levasseur |
1999063
|
Fretting Fatigue of Shafts Strengthened by Surface Plastic Deformation
V Pokhmurskii |
1999064
|
Stability of Residual Stresses in Shot Peened & High Pressure Water Peened Stainless Steels at Elevated Temperatures
P Krull, Th Nitschke-Pagel, H Wohlfahrt |
1999008
|
Shot Peening - Past, Present and Future
G Nachman |
1999010
|
The Shot Peening and Something Additional
Salko Djozic, B.Sc. |
1999021
|
Shot Peening and Stress Peening of AISI 4140 at Increased Temperatures
A Wick, V Schulze, O Vohringer |
1999022
|
An Effect of Peening on Fretting Fatigue
Y Watanabe, N Hasegawa, H Endo, E Marui, Y Aoki |
1999023
|
Effects of Shot Peening on Process of Carburization and Selected Strength Properties of Steel 18 HGT
A Nakonieczny, T Zolciak, G Monka |
1999024
|
Effects of Shot Peening and Roller-Burnishing on Fatigue Performance of Various Titanium Alloys
A Drechsler, J Kiese, L Wagner |
1999011
|
Transformations Induced in Austenitic Stainless Steels by Shot Peening
D Kirk |
1999025
|
Influence of Shot Peening on Fatigue Performance of High-Strength Aluminum - and Magnesium Alloys
Dorr, Hilpert, Beckmerhagen, Kiefer, Wagner |
1999026
|
Behaviour of Shot Peened Electron Beam Welded S. S. Plate Samples Under Combined Reverse Torsional & Bending Cyclic Stress
V S Nadkarni M C Sharma |
1999027
|
Effects of Peening on Stress Corrosion Cracking in Carbon Steel
D Kirk, P E Render |
1999028
|
Role of Shot Peening on Life Extension of 12% Cr Turbine, Blading Martensitic Steel Subjected to SCC and Corrosion Fatigue
G V Prabhugaunkar, M S Rawat, C R Prassad |
1999029
|
Influence of Shot Peening on Corrosion Properties of Steam Turbine Blading Steel
M S Rawat, T R Jayaraman, C R K Prasad, Y Kalpana |
1999030
|
The Influence on Corrosion With Residual Stress and Transformation Induced in Shot-Peened Austenitic Stainless Steel
Kisuke Iida, Masayoshi Ohshima |
1999031
|
Effect of Shot Peening on Stress Corrosion Cracking on Austenitic Stainless Steel
J Kritzler |
1999032
|
Exfoliation Corrosion Located by Search Peening
W Wubbenhorst |
1999033
|
Numerical Simulation of Multiple Shot Impact
S T S Al-Hassani |
1999034
|
Calculated Determination of the Parameters of the Surface Layer
Vyacheslav F Bezyazichny, Tatyana D Kozhina,C.T.S. |
1999012
|
Residual Stresses Induced by Peening Austenitic Ductile Cast-Iron
D Kirk, D G Birch |
1999035
|
Shot Peen Impact on Life, Part 1: Designed Experiment Using Rene 88DT
M Tufft |
1999036
|
Shot Peen Impact on Life, Part 2: Single Particle Impact Tests Using Production Shot
M Tufft |
1999037
|
Shot Peen Impact on Life, Part 3: Development of a Fracture Mechanics/Threshold Behavior Predictive Model
M Tufft |
1999038
|
An Approach to Relate the Shot Peening Parameters to the Induced Residual Stresses
M Guagliano, L Vergani, M Bandini, F Gili |
1999039
|
The Deformation Affected Non Stationary Diffusion
B Bozek, M Danielewski, K Holly |
1999040
|
Factors Affecting Almen Strip Curvature Readings
D Kirk, R Hollyoak |
1999041
|
Tight Tolerance Peen Forming With On-Line Shape Control
S Kittel, W Linnemann, F Wustefeld, R Kopp |
1999042
|
A New Method of Measurement of the Velocity of Solid Particles and Their Mass For Air Blasting
J Andziak |
1999043
|
Instrument For Nondestructive Measurements of Stress Depth Profiles in Shot Peened Aluminum Alloys
K J Kozaczek, P R Moran, D S Kurtz, R Martin |
1999044
|
Control Effects By Shot Peening With Application of the Eddy Current Method
Cz Dybiec, M Dybiec |
1999045
|
Advances In Eddy Current Measurement of Residual Stress
D Barac, W Katcher, J Soules |
1999013
|
Investigation on the Microstructure Changes of NiCrAIY Coating Due to Shot Peening Plastic Deformation and Aging
Wang Renzhi, Ru Jilai |
1999046
|
Boiling Heat Transfer From Shot Peened Aluminium Surface to Glycol Solution
M C Sharma, Anupam Hara |
1999047
|
Effect of Shot Peening on Fatigue Strength of Phosphor Bronze C5191
Katsuji Tosha, Yoshinori Ueno, Kisuke Iida |
1999048
|
Shot Peening Influence on Tribological Characteristics of Surfaces
D Adamovic, M Babic, B Jeremic |
1999069
|
Calibration of Vibration Shot Peening Fatique Life and Limit Residual Stresses After Technological Process
Salko Djozic, B.Sc. |
1999049
|
Combining Case Hardening and Shot Peening For Gear Steels: Influence on Residual Stress
C Peyrac, JF Flavenot, F Convert |
1999050
|
Peening Characteristics of Cemented Carbide Peening Shot & Life Improvement of Cold Forging Die
T Ito, T Mizuno, T Takahashi, J Kurosaki |
1999051
|
New Laser Technology Makes Lasershot sm Peening Commercially Affordable
James J Daly, James R Harrison, Lloyd A Hackel |
1999052
|
Effect of Laser Peening on Residual Stress and Stress Corrosion Cracking for Type 304 Stainless Steel
M Obata, Y Sano, N Mukai, M Yoda, S Shima, M Kanno |
1999053
|
The Application of Peening by Water in the Closed Vertical Vessel
Salko Djozic, B. Sc. |
1999054
|
The Shot Peening in the Closed Metallic Chamber
Salko Djozic, B Sc |
1999055
|
Manual Peening With the Rotary Flap Process
P G Bailey |
1999056
|
Gentle Shot Peening of Angular Surfaces
Salko Djozic, B.Sc. |
1999057
|
Gas Detonation Technology of Surface Hardening
T Babul, A Nakonieczny |
1999014
|
Effect of Shot Peening Parameters on the Surface Characteristics of Differently Heat Treated AISI 4140
A Wick, H Holzapfel, V Schulze, O Vohringer |
1999058
|
Activation of Surface in Gas Nitriding Process
J Baranowska, K Szczecinski, M Wysiecki |
1999059
|
Design and Development of Pneumatic Induction Type Ball Peening Nozzle
M C Sharma, N Nath |
1999060
|
Pneumodynamic Treatment of Machine Parts by Means of Special Tools
A Minakov, V Tilipalov |
1999061
|
Stressonic Shot Peening (Ultrasonic Process)
Jm Duchazeaubeneix |
1999009
|
Papers on Shot Peening Published in the World for the Last Thirteen Years
Katsuji Tosha |
1999015
|
The Temperature Change on Surface of Workpiece During Peening
N. Hasegawa, K. Hattori, Y. Watanabe, K. Fukuyama |
1999016
|
Influence of Abrasive Blast Cleaning and Vibrofinishing on Surface Properties of the Stainless Steel OH18N9
J. Andziak, M. Brzezinski |
1999017
|
Roughness of Shot-Peened Surfaces - Definition and Measurement
R Clausen, J Stangenberg |
1999018
|
Near Surface Microstructures in Mechanically Surface Treated Materials and Their Consequences on Cyclic Deformation Behaviour
I Altenberger, U Martin, B Scholtes, H
Oettel |
1999019
|
The Development of Residual Stresses at Bending Specimens Under the Influence of Setting and Stress Peening
E Muller |
1999020
|
The Residual Stress Distribution in Shot Peened Carburized Steel Under Fatigue
Kisuke Iida, Yozo Hirose |
1999006
|
Optimisation of the Shot Peening Process in Terms of Fatigue Resistance
Romero, Rios, Fam, Levers |
1999007
|
Towards Peen Forming Process Optimisation
D.S. Gardiner, M.J. Platts |
