2005068
|
The Interest To Use Tungsten Carbide Balls With Stressonic Ultrasonic Shot-Peening Process: Application To Aero Engines Parts
Jean-Michel Duchazeaubeneix, Sonats |
2005060
|
Thermo-Elasto-Plastic Model for Shot Peening: A Numerical and Experimental Approach
Rouquette Rouhaud Pron François Bissieux |
2005061
|
Heterogeneous Ultrasonic Shot Peening: Experiment and Simulation
Micoulaut Retraint Viot François |
2005062
|
Fundamentals of the Deep Rolling of Compressor Blades for Turbo Aircraft Engines
S Mader, F Klocke |
2005064
|
Proposing an Applied Information Based Solution in Studying Shot-Peening Process
R Azizi, B Disfani |
2005065
|
Deep Rolling - The Past, The Present and The Future
I Altenberger |
2005066
|
Optimization of Residual Stress and Fatigue Life in Laser Peened Componts
MR Hill, TE Pistochini, AT DeWald |
2005069
|
Effect of Ultra Shot Peening on Contact Surface Strength
Watanabe, Hattori, Handa, Yoshida, Taki, Duchazeau |
2005070
|
Effect of Deep Rolling at Elevated and Low Temperatures on the Isothermal Fatigue Behavior of AISI 304
I Nikitin, I Altenberger, B Scholtes |
2005071
|
Deburring and Surface Conditioning of Micro Milled Structures by Abrasive and Non-Abrasive Micro Peening
C Horsch, V Schulze, D Lšhe |
2005072
|
Shot Peening With Dry Ice
E Uhlmann, M Krieg |
2005073
|
Cavitation Peening By Using Cavitating Jet In Air
H Soyama, K Homma |
2005074
|
"Vacuum Blasting". An Innovative New Process For Metallic Coating Of Surfaces With A Shot / Powder Mixture
Gerard Pieper, Sigurd Ruhland |
2005075
|
Optimisation of Carburising and Shot Peening, In Order To Improve Both Bending and Contact Fatigue Behaviour For Gear Applica
C Peyrac, J Flavenot |
2005089
|
Fatigue Limits Prediction of Shot Peened Materials
H. Guechichi*, L. Castex** |
2005090
|
Fatigue Strength Prediction of a Shot Peened 42CRMO4 Steel Using Multiaxial Fatigue Criterion and Surface Roughness Correctio
Palin-Luc, Flavenot, Lasserre, Charles,
Leguernic |
2005091
|
Residual Stress Sensitivity of Case-Hardened Notched Specimen
Krug, Lang, Lšhe |
2005092
|
The Effects of Shot Peening and Deep Rolling on the Surface Layer and the Mechanical Properties of Sintered Iron
Merkel, Schulze, Všhringer |
2005093
|
Comparison of Mechanical Suppression by Shot Peening and Low Plasticity Burnishing to Mitigate SCC and Corrosion Fatigue Fail
Prevey, Jayaraman, Ontko, Shepard, Ware,
Coate |
2005094
|
Static and Dynamic Strain Ageing of Deep Rolled Plain Carbon Steel SAE 1045 for Optimized Fatigue Strength
Altenberger, Nikitin, Scholtes |
2005095
|
Fatigue Life Improvement Through Nanostructuring of Stainless Steel
Roland, Retraint, K Lu, J Lu |
2005096
|
Overview of Low Plasticity Burnishing for Mitigation of Fatigue Damage Mechanisms
Prevey, Jayaraman, Cammett |
2005097
|
Analysis of the Influence of Shot Peening on the Fatigue Life of a Hard Chromium Electroplated AISI 4340 Steel Underplate
Torres, Baptista, Nascimento, Voorwald |
2005098
|
Fatigue Strength of the Steel After the Percussive Burnishing Process
D. Stadnicka |
2005099
|
Fatigue Performance of Light-Weight Alloys: Influences of Shot Peening and Pre-Corrosion
C. Mueller and L. Wagner |
2005100
|
Coverage Effects in Shot Peening of AL 2024-T4
T. Ludian and L. Wagner |
2005101
|
Effect of Deep Rolling on the Fatigue Behavior of Under-, Peak- and Over-Aged AA6110 at Room Temperature
P. Juijerm, I. Altenberger, B. Scholtes |
2005102
|
Mechanical Surface Treatments on the High-Strength Wrought Magnesium Alloy AZ80
Zhang, Lindemann, Kiefer and Leyens |
2005103
|
Deep Rolling of Titanium Rods for Application in Total Hip Arthroplasty
Eigenmann, Holzwarth, Kachler, Gšske, Wilcke, Schu |
2005104
|
Effects of Aging Treatment and Shot Peening Variables of HCF Performance of Timetal LCB
Kocan, Rack, Wagner |
2005106
|
Effect of Prior Cold Work on Fatigue Performance of Shot Peened TI-2.5CU
H. Boeckels and L. Wagner |
2005105
|
Advances in Shot Peening of Silicon Nitride Ceramics
W. Pfeiffer and T. Frey |
2005107
|
Effects of Shot Peening on the Corrosion Fatigue Life of Al 7075-T6
Cheong, Nam, Lee, Kim |
2005108
|
Evolution of Shot Peening Experimental Techniques
D. Kirk |
2005109
|
History of Shot Peening Specifications
J. Champaigne |
2005110
|
Implementing On-Line Process Control for Shot Peening
Haubold, Hennig, WŸstefeld, Kittel, Friese |
2005111
|
On-Line Process Control for Shot Peening Applications
WŸstefeld, Linnemann, Kittel, Friese |
2005112
|
Relationship Between Coverage and Surface Residual Stress
D. Kirk and R. C. Hollyoak |
2005113
|
Influence of Shot Velocity and Shot Size On Almen Intensity and Residual Stress Depth Distributions
W. Zinn and B. Scholtes |
2005114
|
Particle Velocity Sensor for Improving Shot Peening Process Control
Barker, Young, Pouliot |
2005115
|
Factors That Influence Almen Strip Arc Height
P. Bailey and J. Champaigne |
2005116
|
Shot Peening and Grit Blasting - Effects on Surface Integrity-
Tosha, Lu, Guelorget, Nagashima |
2005117
|
Optimising Shot Peening Parameters Using DoE
Lassithiotakis, Aylott, Shaw, Ooi, Petit-Renaud |
2005118
|
Characterization of Shot Peened Components by X-Ray Diffraction: A Method On Its Way From the Laboratory Into Industrial Prod
Wulf Pfeiffer |
2005119
|
Stability of Surface Changes Induced By Mechanical Surface Treatments
V. Schulze |
2005120
|
The Effect of Shot Peening Coverage on Residual Stress, Cold Work and Fatigue in a Nickel-Base Superalloy
J. Cammett, P. Prevéy and N. Jayaraman |
2005121
|
Evolution of the Residual Stresses by Stress Rolling
Eckehard MŸller |
2005122
|
Eigenstrain Generated by Shot Peening in Udimet 720LI Inferred By Means of Finite Element and Analytical Models
M. Satraki, A. Evans, A. King, G. Bruno, P. Wither |
2005123
|
Effect of Shot-Peening on the Fatigue Strength of Spring Steel After Exposure to Corrosion
A. Nakonieczny and G. Monka |
2005124
|
The Effect of Incidence Angle on Residual Stress State In Laser Peened Ti-6Al-4V Plate
Evans, King, Pirling, Bruno, Withers |
2005125
|
Relation Between Microstructure of Shot-Peening Steel And Its Mechanical Characteristics
Haga, Harada, Tsubakino |
2005126
|
Laser Shock Processing As A Method For Surface Properties Modification Of Metallic Materials
Oca–a, Morales, Molpeceres, Porro |
2005127
|
Characteristics of Internal Surface Layer of Machine Parts Using Rebound Shots
Yasunori Harada |
2005054
|
Effect of Metal-Spraying and Shot Peening on Abrasive Wear of Carbon Steel
MC Sharma, SC Modi |
2005055
|
Finite Element Analysis of Shot Peening -On the Form of a Single Dent-
N Hirai, K Tosha, E Rouhaud |
2005056
|
A 3-D Numerical Study of Shot Peening Process Using Multiple Shot Impacts
GH Majzoobi , R Azizi |
2005063
|
Calculated Determination of Optimum Peening Conditions In Terms of Collision Energy on Coil Spring by Shot Peening
A Amano, T Sakakibara, M Wakita, Chuo Spring Co Lt |
2005067
|
Generation of Nanostructures by SMAT
Jian Lu, K. Lu |
