shotpeener.com

 


Electronics, Inc.

Commerical Resources

Classified Ads

Educational Resources
Library
FAQs
Learning On-Line
Shot Peener Newsletter EI US Workshop
EI European Workshop On-Site Training FAA Training

Communicate & Interact
Ricochet Club

News & Events
CalendarNews

Links
Related Sites

SAE Information

 

 

Specifications relating to Shot Peening

Access Title Author - Owner Source
1990012 Computer Monitored Cast Steel Shot Peening Of Metal Parts AiResearch Los Angeles Division EMS92406
1988092 Glass Bead Peening of Aluminum Parts AiResearch Los Angelos AiResearch EMS248
1996185 51-29-11 Airbus Industrie Airbus Industrie
1993145 01-01-13 Airbus Industrie Airbus Industrie
1997032 Shot Peening PS-1201 Revised 02/14/1997 AlliedSignal Aircraft Landing Systems AlliedSignal Aircraft Landing Systems
1997033 Shot Peening of Production Wheel and Brake Components PS-1204 Revised 06/10/91 AlliedSignal Aircraft Landing Systems AlliedSignal Aircraft Landing Systems
1993035 Shot Peening of Production Wheel and Brake Components (Restricted Distribution) AlliedSignal Aircraft Landing Systems AlliedSignal Aircraft Landing Systems PS-1204
1993111 Glass Bead Peening or Blasting Allison Engine Company Allison Engine Company
1979006 Shot Peening Of Steel, Aluminum, And Titanium Parts Bell Helicopter Textron BPS 4409 Dec 21,1979
2005128 Shot Peening Part Number One 20-10-03 Boeing Standard Overhaul Practices Manual
1998016 Peening P.S. 14023 Revision P Boeing (St. Louis) P.S. 14023 Revision P Boeing (St. Louis) P.S. 14023 Revision P
1998019 Peening with Shot-Bonded Wheels Boeing (St. Louis) P.S. 14023.1 Revision B Boeing (St. Louis) P.S. 14023 Revision P
1988023 Shot Peening - Self Contained (flap Peening) BAC 5730-2 Rev C Boeing Commercial Airplane Co BAC 5730-2, REV. C
1993102 Shot Peening Process Specification Departure 9-1 (BAC 5728) Boeing Commercial Airplane Co. BAC 5728 (9-1)
1992060 Shot Peening Process Specification Departure 1-2 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (1-2)
1990148 Shot Peening Process Specification Departure 2-4 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (2-4)
1991090 Shot Peening Process Specification Departure 2-5 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (2-5)
1988064 Shot Peening Process Specification Departure 6-61 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (6-61)
1993100 Shot Peening Process Specification Departure 8-11 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (8-11)
1993101 Shot Peening Process Specification Departure 8-12 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (8-12)
1990066 Shot Peening Process Specification Departure 2-3 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 2- 3) 11-14-90
1988025 Shot Peening Process Specification Departure 6-61 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-61) 12-7-88
1989016 Shot Peening Process Specification Departure 6-63 (BAC-5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-63), 8-31-89
1990064 Shot Peening Process Specification Departure 6-66 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-66) 3-30-90
1990068 Shot Peening Process Specification Departure 6-66 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-66) 3-30-90
1990067 Shot Peening Process Specification Departure 6-67 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-67) 5-7-90
1990065 Shot Peening Process Specification Departure 6-69 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-69) 11-29-90
1995016 Shot Peening Process Specification Departure 6-77 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 6-77)
1997034 Shot Peening Boeing Commercial Airplane Co. BAC 5730 (PSD 6-81) (Supersedes PSD 6-77) NOT FOR DISTRIBUTION
1989015 Shot Peening Process Specification Departure 8-9 (BAC 5730) Boeing Commercial Airplane Co. BAC 5730 (PSD 8- 9) REV. 4-17-89
1988003 Shot Peening Specification BAC 5730 - Rev K Boeing Commercial Airplane Co. BAC 5730, REV. K, 7-5-88
1990070 Shot Peening Specification BAC 5730 - Rev L Boeing Commercial Airplane Co. BAC 5730, REV. L, 5-16-90
1992006 Shot Peening Specification BAC 5730 - Rev M Boeing Commercial Airplane Co. BAC 5730, Rev. M 3-25-92
1989014 Shot Peening Process Specification Departure L-3 (BAC 5730) Boeing Helicopter BAC 5730 (PSD L-3) 12-19-89
1995011 Shot Peening of Metal Parts Bombardier Inc. Canadair MPS 185-2 Rev I 1995-05-12
1990079 Steel Shot Peening For Improved Fatigue, Stress Corrosion And Fretting Resistance British Aerospace BAEP 2009 Issue 1
1998017 Shot Peening for inducement of compressive surface stresses for metal parts Bureau de normalisation de L'Aeronautique et de lE Bureau de normalisation de L'Aeronautique et de lE
1988089 Surface Stressing by Peening 70-52-11-380-002 CFM International CFM International
2000001 The Critical Operations of Shot Peening. Caterpillar Inc. CAT 1E 2054 Spec Caterpillar Inc
1959005 Shot Peening of Metal Parts Convair div of General Dynamics Process Standard PS 70.24
1990118 Shot Peening Sepcification Spicer Heavy Axle & Brake Div Dana Corporation Dana Corporation
1987082 Shot Peening Of Metal Parts DeHavilland Aircraft Co of Canada PPS 17.03 22Aug87
1987076 Shot Peen Forming DeHavilland Aircraft of Canada PPS 17.04
1984138 ShotPeening Douglas Aircraft Company Overhaul Manual DC-9
2002135 MEP 01-009 Embraer Embraer MEP 01-009 Rev. E 28 Mar 02
2006035 NE 40-072 Embraer Embraer NE 40-072 Rev. Q 28 Jul 06
1963010 Process Specification for Shot Peening of Metal Parts General Dynamics FPS-1032
1990150 Wrought Steel Media for Shot Peening General Electric D50TF11, Issue S1, Dec. 90
1998012 Almen Strips for Shot Peening General Electric D50TF14-S1
1998005 Wrought Steel Media for Shot Peening General Electric DFO-D50TF11-3, Mar 98 (Supersedes DFO-D50TF11-2)
1992053 Supplier Quality System Requirements General Electric GE
2003002 Shot Peening of Metal Parts General Electric GE P11TF3 S-17
1991023 Shot Peening Of Metal Parts General Electric P11TF3-S10
1992007 Shot Peening of Metal Parts General Electric P11TF3-S11
1997027 Shot Peening of Metal Parts General Electric P11TF3-S13
1985018 Shot Peening For Surface Enhancement General Electric P11TF7
1989064 Shot Peening for Surface Enhancement General Electric P11TF7, Issue No. S1
1990072 Shot Peening for Surface Enhancement General Electric P11TF7-S1-Amendment 1
1989010 Metallic Shot Peening For Critical Applications General Electric P11TF8 issue 2
1992004 Metallic Shot Peening for Critical Applications General Electric P11TF8-S3 Jan 9,1992
1992005 Metallic Shot Peening for Critical Applications General Electric P11TF8-S4
1997028 Metallic Shot Peening for Critical Applications General Electric P11TF8-S6
1985016 Shot Peen Operator And Equipment Qualification And Certification General Electric P28TF4
1985014 Peening Coverage Inspection Using Floursecnt Tracer System General Electric P3TF23
1992063 Certilfied Materials Test Laboratories (CMTL) Metallic Materials General Electric Quality Spec S-400 D
1990076 Shotpeening--commercial Engine Standard Practices Manual General Electric TASK 70-47-01-30-016
1966009 Recommended Practices For Controlling Shot Peening Processes General Motors GM 4283-P
1966032 Cut Steel Wire Shot General Motors GM 4395-M
1969050 Cast Iron and Grit General Motors GM 4398 and GM 4399
1969051 Cast Steel Shot General Motors GM 6017-M
1992037 Recommended Practices for Shot Peening Processes General Motors Engineering Standard GM 4283-P
1991025 Shot Peening of Aluminum Alloy Blades and Spars (Rev H) Hamilton Standard HS102 (Rev H)
1985019 Specification for the Acceptance of Shot for Peening (Rev D) Hamilton Standard HS299
1991024 Shot Peening of Aluminum Alloy Blades (Rev F) Hamilton Standard PMP622 (Rev F)
1977008 The Measurement Of Peening And Blasting Intensity By The Almen Gauge Hawker Siddeley Aviation S.29.46 issue 2 amdt. 3
1976009 Surface Improvement By The Use Of Glass Beads Hawker Siddeley Aviation S26-2007 Issue 2, Amendment 1
1967006 Shot Peening Hyster Company Engineering Specification HC E-62
1978010 Shot Peening of Metal Parts A-39 International Harvester International Harvester Engineering Materials Specifcation
1977010 Shot Peening of Metal Parts International Harvester International Harvester Engineering Materials Specification
1987109 Test Sieves Japanese Standards Association Japanese Industrial Standard JIS Z 8801 - 1987
1978006 Shot Peening Of Metal Parts Lockeed-Georgia Company MPS 73401
1978008 Shot, Peening Lockeed-Georgia Company STM11-601 (Rev G)
1978007 Shot Peening Of Metal Parts Lockeed-Georgia Company STP51-501 Rev. J
1968005 Specification For Purchase Of Cast Steel Peening Shot Metal Improvement Co. QCO 01-11A
1970012 Specification For Purchase Of Glass Beads For Peening Metal Improvement Co. QCS-EC-007 Jan 13,1970
2002088 Mechanical Methods for the Inducement of Residual Surface Compressive Stresses Ministry of Defence Defence Standard 03-21(Issue 3 DEF STAN 03-21/3
1991064 Surface Treatments - Shotpeening 70-41-02 Pratt & Whitney Standard Practices 70-41-02
1989034 Surface Treatments - Bead Peening 70-41-01 Pratt & Whitney Standard Practices 70-410-1
1986094 TAM65618 N Test Strip Pratt & Whitney TAM65618
1948011 Shot Peening AMS 2430 SAE SAE: AMS 2430, Issued 09/01/1948
1971006 Shot Peening AMS 2430 G SAE SAE: AMS 2430G, REV 11/15/2001
1982010 Shot Peening AMS 2430 J SAE SAE: AMS 2430J, REV
1988022 Shot Peening AMS 2430 K SAE SAE: AMS 2430K, REV 04/01/1988
1993117 Shot Peening AMS 2430 L SAE SAE: AMS 2430L, REV 07/01/1993
2003006 Shot Peening, Automatic AMS 2430 M SAE SAE: AMS 2430M, REV 09/2003
2007034 Peening Media (ASR) Cast Steel Shot, Hard (45 to 52 Hrc) SAE SAE: AMS 2431 1D, REV 05/01/2007
2007035 Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 Hrc) AMS 2431 2D SAE SAE: AMS 2431 2D, REV 05/2007
2007036 Peening Media (AWCR) Conditioned Carbon Steel Cut Wire Shot sizes 80, 96, and 116 AMS 2431 3D SAE SAE: AMS 2431 3D, REV 05/2007
2005134 Peening Media Glass Shot AMS 2431/6B SAE SAE: AMS 2431 6B 02/2005
1988017 Peening Media General Requirements AMS 2431 SAE SAE: AMS 2431, REV 04/l/1988
1988012 Peening Media Cast Steel Shot, Regular (45 - 52 Hrc) AMS 2431 1 SAE SAE: AMS 2431/1, REV 04/0l/1988
1996103 Peening Media Cast Steel Shot, Regular (45-52 Hrc) AMS 2431 1A SAE SAE: AMS 2431/1A, REV 09/01/1996
1997010 Peening Media (ASR) AMS 2431 1B SAE SAE: AMS 2431/1B, REV 12/01/1997
2002137 Peening Media (ASR) Cast Steel Shot, Hard (45 to 52Hrc) AMS 2431 1C SAE SAE: AMS 2431/1C REV 02/2002
1988013 Peening Media Cast Steel Shot, Hard (55 - 62 Hrc) AMS 2431 2 SAE SAE: AMS 2431/2, REV 04/0l/1988
1996104 Peening Media Cast Steel Shot, Hard (55 - 62 Hrc) AMS 2431 2A SAE SAE: AMS 2431/2A, REV 09/01/1996
1997011 Peening Media Cast Steel Shot, Hard (55 to 62Hrc) AMS 2431 2B SAE SAE: AMS 2431/2B REV 12/01/1997
1988015 Peening Media Conditioned Carbon Steel Cut Wire Shot AMS 2431 3 SAE SAE: AMS 2431/3, REV 04/01/1988
1996105 Peening Media Conditioned Carbon Steel Cut Wire Shot AMS 2431 3A SAE SAE: AMS 2431/3A, REV 09/01/1996
1996109 Peening Media (AWRC)Hard (45 to 52 Hrc) AMS 2431 3B SAE SAE: AMS 2431/3B, REV 09/01/1991
2006039 Peening Media (AWRC) Conditioned Carbon Steel Cut Wire Shot, Hard (45 to 52Hrc) AMS 2431 3C SAE SAE: AMS 2431/3C, REV 02/2002
1988016 Peening Media Conditioned Stainless Steel Cut Wire Shot AMS 2431 4 SAE SAE: AMS 2431/4, REV 04/01/1988
2006040 Peening Media (AWS) Conditioned Stainless Steel Cut Wire Shot, Hard (45 to 50Hrc) AMS 2431 4A SAE SAE: AMS 2431/4A, REV 05/2006
1996106 Peening Media Conditioned Stainless Steel Cut Wire Shot AMS 2431 4A SAE SAE: AMS 2431/4A, REV 099/01/1996
2007039 Peening Media (AWS) Conditioned Stainless Steel Cut Wire Shot SAE SAE: AMS 2431/4C 05/2007
1988011 Peening Media Case Hardened Steel Peening Balls AMS 2431 5 SAE SAE: AMS 2431/5, REV 04/01/1988
2006043 Peening Media Case Hardened Steel Peening Balls SAE SAE: AMS 2431/5A 05/2006
1988018 Peening Media Glass Shot AMS 2431 6 SAE SAE: AMS 2431/6, REV 04/l0/1988
2007037 Peening Media Glass Shot AMS 2431/6C SAE SAE: AMS 2431/6C 08/2007
1988014 Peening Media Ceramic Shot AMS 2431 7 SAE SAE: AMS 2431/7, REV 04/01/1988
1996101 Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62Hrc) AMS 2431/8 SAE SAE: AMS 2431/8, REV 09/01/1996
2006041 Pening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness SAE SAE: AMS 2431/8A, REV 09/2006
2007038 Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 Hrc) AMS 2431 8B SAE SAE: AMS 2431/8B 05/2007
1996102 Peening Media General Requirements AMS 2431 A SAE SAE: AMS 2431A, REV 09/01/1996
2006042 Peening Media General Requirements SAE SAE: AMS 2431B 05/2006
1990075 Shot Peening, Computer Monitored SAE SAE: AMS 2432
1993002 Shot Peening, Computer Monitored SAE SAE: AMS 2432 A Revised 1 Jan 1993
1996111 Shot Peening, Computer Monitored SAE SAE: AMS 2432 B Revised 8/96
1988000 Aluminum Alloy Sheet And Plate 1.0mg-0.60si-0.28cu-0.20cr(6061;-t6 Sht,-t651 Plate) Solution And Precipitation Heat Treated SAE SAE: AMS 4027K
1996115 Aerospace Basic Quality System Standard SAE SAE: ARD9000
1984080 Manufacturing Sequence for Fabrication of High-Strength Steel Parts SAE SAE: ARP 1631
1991019 SAE Manual on Shot Peening SAE SAE: HS-84 rev 3 Sep 1991
1998011 Residual Stress Measurement Xray SAE SAE: HSJ-0784: Notice of Cancellation
1993022 Cut Wire Shot SAE SAE: J 441 Jun93 Superseding May 87, Revised 6-29-93
1987012 Cut Wire Shot SAE SAE: J 441 May87
1979009 Test Strip, Holder and Gage for Shot Peening SAE SAE: J 442 Aug79
1952022 Test Strip, Holder, and Gage for Shot Peening SAE SAE: J 442 Jan52
1995012 Test Strip, Holder, and Gage for Shot Peening SAE SAE: J 442 Jan95
1977070 Test Strip, Holder and Gage for Shot Peening SAE SAE: J 442 Rev 1977
2001018 Test Strip, Holder and Gage for Shot Peening SAE SAE: J 442 Rev Dec 2001
1997041 Test Strip, Holder and Gage for Shot Peening SAE SAE: J 442 Rev May 1997
2001039 Test Strip Holder, and Gage for Shot Peening SAE SAE: J 442 Rev. December 2001
1961012 Test Strip, Holder And Gage For Shot Peening - Sae J442 SAE SAE: J 442 Rev. June 1961
1952023 Procedures for Using Standard Shot-Peening Test Strip SAE SAE: J 443
1984054 Procedures for Using Standard Shot Peening Test SAE SAE: J 443 Jan84
1961011 Procedures For Using Standard Shot Peening Test Strip SAE SAE: J 443 Jun61
1991005 Cast Shot And Grit Size Specifications For Peening And Cleaning SAE SAE: J 444 Aug84
1993023 Cast Shot and Grit Size Specifications for Peening and Cleaning SAE SAE: J 444 May93
2005041 Cast Shot and Grit Size Specifications for Peening and Cleaning SAE SAE: J 444 JUL2005
1996112 Metallic Shot and Grit Mechanical Testing SAE SAE: J 445 Apr96
1984046 Metallic Shot And Grit Mechanical Testing SAE SAE: J 445 Aug84
2005039 Metallic Shot and Grit Mechanical Testing SAE SAE: J 445 JUL2005
1953003 Manual On Blast Cleaning SAE SAE: J 792
1968001 Manual On Blast Cleaning - Sae J792a SAE SAE: J 792a
1981093 Surface Rolling and Other Methods for Mechanical Prestressing of Metals - SAE J811 AUG81 SAE SAE: J 811 Aug81
1962007 Surface Rolling And Other Methods For Mechanical Prestressing Of Metals SAE SAE: J 811 Jun62
1990009 Cast Steel Shot SAE SAE: J 827 Mar90
2005042 High Carbon Cast-Steel Shot SAE SAE: J 827 JUL2005
1975015 Technical Report on Fatigue Properties - SAE J1099 SAE SAE: J 1099
1988029 Size Classification And Characteristics Of Glass Beads For Peening SAE SAE: J 1173 Sep88
1977007 Size Classification And Characteristics Of Ceramic Shot For Peening SAE SAE: J 1830 May87
1989003 Cast Steel Grit, Proposed Specification SAE SAE: J 1993
2005040 High Carbon Cast-Steel Grit SAE SAE: J 1993 JUL2005
1991011 Low Carbon Steel Shot SAE SAE: J 2175 Jun91
2000011 Shot Peening SAE SAE: J 2441, Issued Aug 2000
2001185 AS9100 SAE Aerospace SAE: AS900A, REV 08/2001
2006036 AS9101 SAE Aerospace Sae Aerospace AS9101 Rev C 2006-07
1986056 DMR 71-111 Almen Strip Requirements SNECMA DRM 71-111
1998065 Material & Process Sikorsky Sikorsky SS 8774
1981063 Shot Peening Of Aluminum Alloys - Amend. 3 Sikorsky Aircraft SS 8767
1989033 Commercial Item Despciption Steel Grit U. S. Specification A-A-1041B
1988035 Commercial Item Description Steel Shot U. S. Specification A-A-1042B
1988046 Steel Shot - Commercial Item Description U. S. Specification A-A-1042B
1981087 Commercial Item Description Grain, Abrasive (Soft Blasting) U. S. Specification A-A-1722
1999001 Commercial Item Description Abrasive Materials; for Blasting U. S. Specification A-A-59316 Feb. 99; Superseding MIL-A-21380B July 65
1944006 Shot Peening of Metals, General Specification For U. S. Specification AXS-1272 (Rev. 1)
1995048 Peening of Metal Parts U. S. Specification LPS 500
1987064 Peening Of Metal Parts Local Process Specification (lps/jx 341-149-87) U. S. Specification LPS/JX 341-149-87
1965007 Military Specification Abrasive Material for Blasting U. S. Specification MIL-A-21380B
1979051 Abrasive Materials, for Blasting U. S. Specification MIL-A-21380B Amendment 1 1979
1991115 Abrasive Materials, for Blasting U. S. Specification MIL-A-21380B Notice 1 1991
1993034 Military Specification Abrasive Blasting Media Ship Hull blast Cleaning U. S. Specification MIL-A-22262B(SH) plus AMENDMENT 1
1993021 Anodic Coatings for Aluminum and Aluminum Alloys U. S. Specification MIL-A-8625F
1987177 Balls, Bearing, Ferrous and Non-Ferrous (for use in Bearings, Valves and Bearing Applications) General Specification for U. S. Specification MIL-B-1083D 16 OCT 87
1970018 Military Specification Grain, Abrasive, Soft for Carbon Removal U. S. Specification MIL-G-5634C plus AMENDMENT 2 and 3
1966001 Glass Beads: For Cleaning And Peening U. S. Specification MIL-G-9954A
1996137 Glass Beads, for Cleaning and Peening U. S. Specification MIL-G-9954A (Notice of Cancellation) 25 Apr 1996
1980005 Glass Beads: For Cleaning And Peening, amend 2 U. S. Specification MIL-G-9954A, Amend. 2
1963001 Inspection System Requirements U. S. Specification MIL-I-45208A
1981086 Magnesium Alloys, Anodic Treatment Of U. S. Specification MIL-M-45202C
1950003 Metal Grit And Shot For Blast Cleaning And Peening U. S. Specification MIL-M-851-A
1974006 Peening of Metals U. S. Specification MIL-P-81985 (AS)
1984047 Military Specification Peening Of Metals, Mil-p-81985(as) Amendment 1 U. S. Specification MIL-P-81985(AS) Amendment 1
1988019 Plastic Media, For Removal Of Organic Coatings U. S. Specification MIL-P-85891(AS) 6 May 1988
1992038 Military Specification Plastic Media, for Removal of Organic Coating U. S. Specification MIL-P-85891A plus AMENDMENT 1
2005131 Glass Beads: For Cleaning and Peening U. S. Specification MIL-PRF-9954B
1972012 Rotary Flap Peening Of Metal Parts U. S. Specification MIL-R-81841(AS)
1956011 Shot Peening of Ferrous Metal Parts U. S. Specification MIL-S-13165A
1966006 Shot Peening Of Metal Parts U. S. Specification MIL-S-13165B
1989020 Shot Peening of Metal Parts U. S. Specification MIL-S-13165C
1991055 Shot Peening of Metal Parts U. S. Specification MIL-S-13165C Amendment 1
1998006 Shot Peening of Metal Parts U. S. Specification MIL-S-13165C, Notice of Cancellation; Feb. 19, 1998
1971007 Surfaces Treatments And Inorganic Coatings For Metal Surfaces Of Weapons Systems U. S. Specification MIL-S-5002C
1972032 Steel Grit, Shot and Cut Wire Shot; and Iron Grit and Shot - Blast Cleaning and Peening U. S. Specification MIL-S-851C (Superseding MIL-S-851B 26 Sept 55)
1979008 Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot-blast Cleaning And Peening U. S. Specification MIL-S-851C Amendment
1989019 Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot-blast Cleaning And Peening U. S. Specification MIL-S-851D 21 April 1989
1990078 Steel Grit, Shot and Cut Wire Shot, and Iron Grit and Shot Blast Cleaning and Peening - Amendment 1 U. S. Specification MIL-S-851D Amendment 1
1996100 Steel Grit, Shot, and Cut Wire Shot; and Iron Grit and Shot-blast Cleaning and Peening U. S. Specification MIL-S-851D Notice 1 20/May/1996 (cancellation)
1996117 Steel Grit, Shot and Cut Wire Shot; And Iron Grit and Shot Blast Cleaning and Peening U. S. Specification MIL-S-851D Notice 2 (Superceding Notice 1 May 20, 1996)
1996107 Steel Grit, Shot, and Cut Wire Shot; and Iron Grit and Shot-blast Cleaning and Peening U. S. Specification MIL-S-851D, 8 November 1996 (Reinstatement Letter: precedes notice 2)
1997009 Steel Grit, Shot, and Cut Wire Shot; and Iron Grit and Shot Blast Cleaning and Peening U. S. Specification MIL-S-851D, Notice of Cancellation, Superseding Notice 2 13/Dec/96
1988032 Calibration Systems Requirements U. S. Specification MIL-STD 45662A
1963003 Sampling Procedures And Tables For Inspection By Attributes U. S. Specification MIL-STD-105D
1989032 Military Standard Abrasive Blasting U. S. Specification MIL-STD-1504B (Superseding MIL-STD-1504A Aug. 23, 1978)
1997007 Abrasive Blasting U. S. Specification MIL-STD-1504B; Notice I
1980001 Calibration Systems Requirements U. S. Specification MIL-STD-45662 (Superseding MIL-C-45662A Feb. 9, 1962)
1995022 Calibration System Requirements U. S. Specification MIL-STD-45662A (Notice of Cancellation; Apr 18, 1995)
1965003 Glass Bead Peening Procedures U. S. Specification MIL-STD-852
1996110 Glass Bead Peening Procedures U. S. Specification MIL-STD-852 Notice of Cancellation
1972008 Military Specification Wheels, Peening, Rotary Flap U. S. Specification MIL-W-81840(AS)
1995004 Peening of Metal Parts U. S. Specification NADEP/Jacksonville, FL. US Navy
1990063 Shot Peening Of Aircraft Components U. S. Specification NAVAIRINST 4870.2, AIR-536A, June 4, 1990
1982006 Federal Specification Sheet Aluminum Alloy 6061, Plate And Sheet U. S. Specification QQ-A-250/11F (Superseding QQ-A-250/11E Aug. 27, 1971)
1971027 Aluminum Alloy 2024, Plate and Sheet U. S. Specification QQ-A-250/4E (Superseding QQ-A-250/4D Mar. 17, 1967)
1974012 Aluminum Alloy 2024, Plate and Sheet U. S. Specification QQ-A-250/4E AMENDMENT-1
1983021 Aluminum Alloy 2024, Plate and Sheet U. S. Specification QQ-A-250/4E INTERIM AMENDMENT (superseding amendment-1, Oct 22, 1974)
1978029 Aluminum and Aluminum Alloy Plate and Sheet: General Specifications for U. S. Specification QQ-A-250F (Superseding QQ-A-250E Oct. 19, 1970)
1974011 Chromium Plating (Electrdeposited) U. S. Specification QQ-C-320B Amend4 4/87 Amend2 11/84
1973021 Federal Specification Sieve, Test U. S. Specification RR-S-366D
1978002 Federal Specification Sieve Test U. S. Specification RR-S-366E
1997003 Sieve, Test U. S. Specification RR-S-366E, Notice of Cancellation; Notice 1
1988101 Calibration Systems Requirements U.S. Specification MIL-STD-45662A
1988102 Glass Bead Peening Procedures US Government MIL-STD-852 Notice 1 US Government MIL-STD-852 Notice 1
1973055 General Specification Shot Peening Processes Warner Gear Division of Borg-Warner Corporation Warner Gear Division of Borg-Warner Corporation

Revised Feb 15, 2008




HOME | WELCOME | CONTACT US | BUYER'S GUIDE
LIBRARY | ELECTRONICS, INC

©2008 Electronics, Inc. All rights reserved.