Articles from The Shot Peener Library on weight saving by use of shot peeening.
The word "Weight" appears somewhere in the abstract.
Use "Ctrl+F" to search text.
| Access |
Title |
Author |
Source |
| 2007029 |
Modern Shot Blast Solutions for the Automobile Industry |
Rosler Metal Finishing USA |
TSP Vol 21 / Issue 4, Fall 2007 |
| 2007016 |
New Titanium Technology Center |
Shot Peening Staff |
TSP Volume 21 / Issue 3, Summer 2007 |
| 2005104 |
Effects of Aging Treatment and Shot Peening Variables of HCF Performance of Timetal LCB |
Kocan, Rack, Wagner |
Conf Proc: ICSP-9 (pg 320-325) |
| 2005099 |
Fatigue Performance of Light-Weight Alloys: Influences of Shot Peening and Pre-Corrosion |
C. Mueller and L. Wagner |
Conf Proc: ICSP-9 (pg 288-295) |
| 2005032 |
Suggestion of Image Processing System for Measurement of Coverage |
Handa, Watanabe, Hattori, Toyo Seiko Co., Ltd. |
TSP, Vol 19 / Issue 3, Summer 2005 |
| 2005025 |
The Parting Shot, In with the New . . . |
Jack Champaigne |
TSP, Vol 19 / Issue 1, Winter 2005 |
| 2005022 |
Shot Peening in the News |
Automotive Industry |
TSP, Vol 19 / Issue 1, Winter 2005 |
| 2005004 |
Air Valve Testing |
Dave Eggleston, Engineer, Electronics Inc. |
TSP, Vol 19 / Issue 2, Spring 2005 |
| 2004044 |
Case Study in Shot Peening - Subsurface Residual Stress Nondestructively Quantified for Alloys |
Shot Peening Staff |
TSP, Vol 18 / Issue 1, Winter 2004 |
| 2004028 |
The Total Cost of Weight Revisited: An Essay on Cost as a Function of Weight in Automobiles and the Use of Shot Peening to Re |
S. L. Terry, R. S. Simpson |
TSP, Vol 18 / Issue 2, Spring 2004 |
| 2004014 |
The Application of Mechanical Surface Treatment in the Passenger Car Industry |
Peter Hutmann, BMW Group, Munich, Germany |
TSP, Vol 18 / Issue 3, Summer 2004 |
| 2003012 |
A world class engine: The Optimizer 6500 |
Jim Amish, Engineer, General Engine Products |
TSP, Vol 17 / Issue 4, Fall 2003 |
| 2002091 |
Curve Fitting for Shot Peening Data Analysis |
David Kirk, Coventry University, UK |
TSP, Vol 16 / Issue 1, Spring 2002 |
| 2002089 |
Almen Saturation Curve Fitting |
Dr. David Kirk |
The Shot Peener |
| 2002073 |
Shot Peening Method and Device Therefor |
H. Takeda; K. Ohta; H. Rokutannda, Toyokawa |
US Patent 6,449,998 B1 |
| 2002067 |
Shot Peening and Coverage |
Tange, Okada |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002060 |
Shot Peening and Roller-Burnishing to Improve Fatigue Resistance of the (a+B) Titanium Alloy Ti-6A1-4V |
Kocan, Ostertag and Wagner |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002057 |
Comparison of the Residual Stresses Induced by Shot (Stress) Peening and Rolling in Spring Steel |
Eckehard Muller |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002047 |
Influence of Mechanical Surface Treatments on Notched Fatigue Strength of Magnesium Alloys |
Kuster, Hilpert, Kiefer, Wagner |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002046 |
Fatigue Strength Improvement of Welded Aluminium Alloys by Different Post Weld Treatment Methods |
Nitschke-Pagel, Wohlfahrt |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002045 |
Property Improvement in Light Metals Using Shot Peening |
Gregory, Wagner |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002028 |
Lining of Metal Surface with Hard-Metal Foil using Shot Peening |
Harada, Mori, Maki |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002008 |
Current Applications of Advanced Peen Forming Implementation |
Friese, Lohmar, Wustefeld |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2002002 |
The Application of Mechanical Surface Treatment in the Passenger Car Industry |
Peter Hutmann, BMW Group, Munich, Germany |
Conf Proc: ICSP-8 Sept. 16-20, 2002 Garmisch-Partenkirchen, Germany |
| 2001181 |
Shot Peening In Maintenance Of Steel Structures |
Salko Djozic |
Conf Proc: ICSP & BC - 2 |
| 2001031 |
One slab and a side of silicon carbide to go, please |
Herb Tobben, Mgr., Sample Processing Laboratory |
TSP, Vol 15 / Issue 3, Fall 2001 |
| 2001007 |
Stabilizer for Motor Vehicle |
T Muhr; L Schnaubelt, both of (DE) |
US Patent 6,311,965 B1 |
| 2000015 |
Method for Producing Helical Springs |
J Wienand; G Mier, both of Germany |
US Patent 6,022,427 |
| 2000007 |
Precision Shot Peening |
Keiji Mase, Yoshio Miyasaka |
Fuji Kihan Co., Ltd. |
| 2000004 |
Development of High-Strength Suspension Coil Springs in which Corrosion Fatigue Strength is Important |
Nakano Sakakibara Wakita Sugimoto |
Society of Automotive Engineers, Inc. p.1-7 |
| 1999114 |
Solutions in Automated Blast Cleaning |
Herb Tobben, Manager |
ABC, Vol 4/ No 3, Summer 1999 |
| 1999062 |
Single Piece Wing Utilization Via Advanced Peen Forming Technologies |
S Ramati, S Kennerknecht, G Levasseur |
Conf Proc: ICSP-7 (extra) |
| 1999000 |
Gage for Measuring the Intensity of Shot-Blast peening using Non-magnetic Test Strips Held in Place by Spring-Loaded Plunger |
Jack M. Champaigne |
US Patent 5,877,405 |
| 1998008 |
Surface-Mounted Eddy-Current Sensors for On-Line Monitoring of Fatigue Tests and for Aircraft Health Monitoring |
Neil Goldfine, Darrel Schlicker, Andrew Washabaugh |
NASA/FAA/DoD Conf. Aug 1998 |
| 1998000 |
Improving Fatigue Life of Gears by Shot Peening |
T.Jeff Meister and John S. Eckersley |
Metal Improvement Co. |
| 1996125 |
Development of a Fracture Mechanics Methodology to Access the Competing Mechanics |
Marsha K. Tufft |
Conf Proc: ICSP-6, (presented only) |
| 1996122 |
Method of Forming a Textured Pattern on a Metal Plate which Pattern is Transformed to a Plastic Part, and a Press Plate and P |
Kirk R. Vetter |
US Patent 5,526,664 |
| 1996071 |
Optimization of the Fatigue Behaviour of Welded Joints by Means of Shot Peening - A Comparison of Results on Steel and Alum J |
H. Wohlfahrt, T. Nitschke-Pagel, W. Zinn |
Conf Proc: ICSP-6, (p.243-250) |
| 1996046 |
The Core of Electric Generator What is for Shot Peening? |
Djozic Salko, B.Sc |
Conf Proc: ICSP-6, (p. 1-13) |
| 1996028 |
Corrosion Fatigue and Fracture Behaviour of Shot Peened Carbon Steels |
M.C. Sharma, V.S Nadkarni, G. Agnihotri |
Conf: (Bophal) Intl Conf on Shot Peening and Blast Cleaning (Book:Sharma/Ra |
| 1996012 |
Fatigue Aspects in the Design Details of Steel Bridges |
Dr. P. Suryanarayana |
Conf: (Bophal) Intl Conf on Shot Peening and Blast Cleaning (Book:Sharma/Ra |
| 1995036 |
Methods for the Design, Quality Control, & Management of Fatigue-Limited Metal Components |
Berkley |
US Patent 5,625,664 |
| 1995034 |
Process for Producing a Coil Spring |
Izawa et al. |
US Patent 5,665,179 |
| 1994044 |
Lightweight Suspension System for a Wheeled Vehicle, Spring Arm and Method of Manufacture |
Donald L Stephens |
US Patent 5,366,238 |
| 1994043 |
Method of Manufacturing an Elongated Spring Member |
Donald L Stephens, Skagit, WA |
US Patent 5,365,646 |
| 1993114 |
Development of a New Light-Weight Suspension Coil Spring |
Sakakebara Kusakari Nakano Yasuda Sugimoto Watanab |
p 27-36 |
| 1993085 |
Some Aspects of Stress Peening of Coil Springs for Vehicle Suspensions |
Eckehard Muller |
Conf Proc: ICSP-5, (p.341-348) |
| 1993081 |
Study of Residual Stress Produced in Metal Matrix Composite AlSiCw by Shot Peening |
Nonga, Lu, Flavenot, Lieurade, Bathias |
Conf Proc: ICSP-5, (p.290-299) |
| 1993054 |
Application of Statistically Capable Shot Peening to Automotive Component Design |
Adam Vahratian, Robert Garibay |
Conf Proc: ICSP-5, (p. 73-84) |
| 1993028 |
Centrifugal Blasting Apparatus |
Urakami, Fukashi |
US Patent 5,205,085 |
| 1993014 |
Effect of Shot Peening on Fatigue Performance of Advanced Aluminum Alloys and Aluminum Based Metal Matrix Composits |
Hill S, Gregson P, O'Hara P |
Engineering Materials Univ of Southampton, UK Metal Improvement Co |
| 1992078 |
Using Shot Peening to Multiply the Life of Compressor Components |
John S. Eckersley & Buzz Ferrelli, MIC |
TSP, Vol 06/Issue 3, Fall 1992 |
| 1992025 |
Using Shot Peening to Multiply the Life of compressor Components |
John Eckersley, Buzz Ferrelli |
1992 International Compressor Engineering Conference at Purdue University |
| 1991096 |
High Strength, Ultra Fine Steel Wire having excellent Workability in Stranding & Process & Apparatus for Producing the same |
T. Tarui, S. Sasaki, H. Tashiro, H. Sato |
US Patent 5,240,520 |
| 1991010 |
High Technology Shot Peening For The Automotive Industry |
Garibay, R.P. and Terry, S.L. |
Shot Peening Theory and Appl., IITT Intl., 1991 |
| 1990105 |
Optimized High Productiion Shot Peening for the Automotive Industry |
Garibay, . P. |
Advanced Material Process |
| 1990081 |
Study on the Effects of Shot Peening on the Residual Stress in A1-siC Composite |
J. Lu, B. Miege and J. Flavenot |
Conf Proc: ICSP-4, (p.169-178) |
| 1990036 |
Influence Of Peening On Fatigue Life Of Sic Reinforced Aluminum |
S. Tohriyama, M. Kumano,S. Hisamatsu |
Conf Proc: ICSP-4, (p.307-316) |
| 1990034 |
Improvement Of Hardened Surface By Shot Peening |
Ohsawa, M. and Yonemura, T. |
Conf Proc: ICSP-4, (p.147-158) |
| 1989038 |
Light Metals |
Williams, D. |
CAB Curr. Aware Bull. |
| 1988096 |
Designing Shafts for Long Life, Fatigue lives are affected by many factors |
Lewis Research Center, Cleveland, OH |
TSP, Vol 02/No 2, July 1988 |
| 1988037 |
Liquid Aqueous Abrasive Cleanser |
J. Tse, E. Kaufmann, G. van Buskirk |
US Patent 4,751,016 |
| 1987147 |
Application Of A Double-grooved Spring Steel 55simnvb In The Aerolus Truck Eq-140 |
Ming-Liang, Bang-Jun, Yao-Feng, Chuan |
SAE: 871253 |
| 1987100 |
The Total Cost of Weight Revisited: An Essay on Cost as a Function of Weight in automobiles and the Use of Shot Peening to R |
Terry, S.L. and Simpson, R.S. |
Conf Proc: ICSP-3, (p. 79-86) |
| 1987091 |
Structural Optimization Of Landing Gears Using Starstruc |
Elsaie, A.M., and Santillan, Jr.,R. |
SAE: 871047 |
| 1987078 |
Shot Peen-forming Of Nc-machined Parts With Integrated Stringers Using Large Balls |
Meyer, Reccius, Schulein |
Conf Proc: ICSP-3, (p.327-334) |
| 1987061 |
Optimization Of Shot Peening To Improve The Fatigue Strength Of Ti-6a1-4v |
Franz, H.E. and Olbricht, A. |
Conf Proc: ICSP-3, (p.439-446) |
| 1987048 |
Influence of Peening Parameters, Coating Temperatures and Operating Loads on Residual Stresses of Shot-Peened Barrell Springs |
Hutter, W. and Kloos, K.H. |
Conf Proc: ICSP-3, (p.509-516) |
| 1987044 |
Improved Fatigue Performance Of Gears Through Controlled Shot Peening |
Diepart, C.P. and Burrell, N.K. |
Conf Proc: ICSP-3, (p.169-177) |
| 1987035 |
Guide To Selecting Engineered Materials For Corrosion Resistance |
|
Advanced Materials & Processes, Vol. 2, p 100-104 |
| 1987021 |
Effect Of Shot-peening On Fatigue And Fretting Fatigue Behaviour Of 8090 And 7010 Aluminum Alloys |
Fair, Noble, Waterhouse |
Conf Proc: ICSP-3, (p.431-438) |
| 1985045 |
Portable Abrasive throwing Wheel Device |
J. Carpenter, R. Mullins, R. Smith |
US Patent 4,561,220 |
| 1985033 |
High Sag Resistance Spring Wire For Automotive Suspension |
Murai, Teruyuki, Takamuku, Seizo, etc. |
SAE: 850059 |
| 1981093 |
Surface Rolling and Other Methods for Mechanical Prestressing of Metals - SAE J811 AUG81 |
SAE |
SAE: J 811 Aug81 |
| 1981078 |
Untersuchungen Zur Verbes.spannung.-bestand.einer Geschweis.hoch.al-legier.durch Kugelstrahlen |
Kohler, W. |
Conf Proc: ICSP-1, (p.493-500) |
| 1981068 |
The Application Of Computer - Diagnostics To High Production Shot Peening Systems |
Leliaert, R. M. |
Conf Proc: ICSP-1, (p. 95-100) |
| 1981038 |
Investigation Of Shot Peening As A Forming Process For Aircraft Wing Skins |
Kulkarni, Schey, Badger, |
J. Applied Metalworking, Vol. 1, No. 4 |
| 1974005 |
Advanced V/Stol Propeller Technology |
E. A. Fahy, D. K. Leishman |
Air Force Flight Dynamics Lab. Ohio |
| 1974003 |
Surface Integrity Can Affect Reliability Of Your High-strength Parts |
Field, Michael |
Machine and Tool Blue Book, Feb. 1974 |
| 1974000 |
Advanced V/stol Propeller Technology. Vol. Xii. Advanced Propeller Manufacture And Test |
Fahy, E.A. and Leishman, D.K. |
AFFDL TR-71-88-Vol-12 |
| 1973011 |
Surface Integrity - A New Requirement For Improving Reliability Of Aerospace Hardware |
Field, Michael |
SAMPE Symposium, LA, Apr. 3-5, 1973 |
| 1972034 |
Understanding the Beneficial Effects of Shot Peening |
Black, Paul H. |
Met. Eng. Q, Aug.'72, 12, (3) |
| 1972033 |
Unmasking Hydrogen Embrittlement |
McNitt, R.P. |
Machine Design, November 30, 1972 |
| 1972031 |
Design Features And Results From Fatigue-reliability-research Machines |
Lalli, Kececioglu and McConnell |
SESA, Vol. XXI|X, No. 2 |
| 1970048 |
Theoretical Size, Number, Weight, Volume and area for Soda Lime Glass Beads |
J. R. Ritter |
Potters Industries |
| 1966031 |
Shot Peening in Spring Design |
Straub, John C |
Springs October 1966 |
| 1965000 |
Distributor For Pneumatically Transported Particle-form Material |
Matthys, W. J. et al |
US Patent 3,204,942 |
| 1964007 |
Shot Peening of Pressure Vessels |
Sheehan, J. P. |
IIT Research Institute B1000B1 - Report No. 4 |
| 1964006 |
The Residual Stress Explanation of Fatigue Failures in Mechanical Parts |
Almen, John and Black, Paul |
ASTM |
| 1963017 |
Development Of An Apparatus For Fatigue Testing In Vacuum |
Felgar, R.P. |
SESA, Vol. XX, No. 2 |
| 1962028 |
Measuring Apparatus for Particulate Material Streams |
Francis A. DePollier |
US Patent 3,212,330 |
| 1962007 |
Surface Rolling And Other Methods For Mechanical Prestressing Of Metals |
SAE |
SAE: J 811 Jun62 |
| 1962002 |
Hole Coining To Prevent Fatigue Failures |
Phillips, Austin |
Douglas Aircraft engrg. Paper No. 1068 |
| 1961019 |
Testing Methods For Large Aircraft |
Moseley, D. L. |
SESA, Vol. XVIII, No. 1 |
| 1961000 |
Apparatus For Shot Peening Elongated Articles |
Fuchs,, H. O. et al |
US Patent 2,982,007 |
| 1959015 |
Thermally Induced Lateral Buckling Of Turbine Wheels -analytical And Experimental Correlation |
Helms, H.E. and McLoed, R.N. |
SESA, Vol. XVII, No. 1 |
| 1956004 |
Lightweight Springs For Limited Life |
Spaulding, E.H. |
SAE: Trans. Vol. 64, 1956, p. 453-457 |
| 1955007 |
The Development of Processes Which Result in the Maximum Service Life of Light Weight Alloy Wheels |
Sachs, George |
Kelsey-Hayes Wheel Company |
| 1954009 |
A New Dynamic Creep Testing Machine |
Pao, Y.-H. and Marin, J. |
SESA, Vol. XI, No. 2 |
| 1953013 |
Performance Evaluation Of A Magnesium Alloy Truck Wheel |
Polzin, M.H. |
SESA, Vol. XI, No. 1 |
| 1953007 |
Shot Peening In The Design Of Gears |
Straub |
AGMA, June, 1953 |
| 1952018 |
Stress Concentrations Prod.by Milt.semi-cir.notches In Infinite Plates Under Uniaxial St.of Stress |
Durelli, Lake and Phillips |
SESA, Vol. X, No. 1 |
| 1952006 |
The Effect Of Shot Peening On Damage Caused By Cavitation |
Grossman, N. |
ASTM: Bull. No. 183, TP107, July 1952 |
| 1951005 |
Shot Peening As A Factor In The Design Of Gears |
Straub, J. c. |
Mechanical Engineering, Vol. 73 |
| 1951000 |
Balanced Gear-tooth Design |
Straub, John C. |
Machine Design, "Design Abstracts", June, p. 178 |
| 1950009 |
Residual Stresses In Magnesium: Technique And Results |
Found, G.H. and Pittsley, R. |
SESA, Vol. VIII, No. 1 |
| 1948013 |
Shot Peening - Designers Guide to the Process, its Applications |
Fuchs, H.O. and Hutchinson, E.R. |
Machine Design, Vol. 30, Feb. 6, '58, pp. 116-125 |
| 1943003 |
Shot Blasting To Increase Fatigue Resistance |
Almen, J. O. |
SAE: #430143, Trans. July, 1943, Vol. 51, No. 7, p.248-268 |
| 1943001 |
Endurance Of Machines Under A Few Heavy Loads |
Almen, J. O. |
Metal Progress, September, 1943, p. 435 |
| 1942004 |
Scaling Tool |
Reo D. Gray, James R. Denison |
US Patent 2,356,314 |
| 1942000 |
Dimensional Value Of Lubricants In Gear Design |
Alamen, J. O. |
SAE Journal, September, 1942 |
| 1941003 |
Facts And Fallacies Of Stress Determination |
Almen, J. O. |
SAE Journal, Vol. 5, No. 2, February, 1942 |
