Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Fatigue Weaknesses Of Surfaces
Author: Almen, J.O.
Source: Product Engineering, Nov. 1950, p. 118-140
Publication year 1950
Document number: 1950001
Number of pages: 23
Abstract:
The commonly accepted theories by which we try to explain fractures that occur in structural materials are based upon data obtained from static tests. These theories work
well enough when aplied to the kind of loads from which they were derived, but they fail when the conditions of loading are changed. We are now slowly awakening to the fact
that these theories are incomplete, inaccurate, and often misleading.
T
he remarkable progress that has been made toward more effective use of materials in modern machine structures has been accomplished in spite of our faulty understanding of
the behavior of metals under the various kinds of loads that are encountered in practice.
B
ecause of inadequate understanding of the fundamentals that are involved, designers of high duty machines cannot proceed by orderly application of engineering principles.
Instead, machine parts are dimensioned by a curious mixture of engineering formulas, empirical correction factors, and plain guessing based on unorganized experience. Under
the present circumstances, experience is far more important in solving machine design problems than training in engineering "fundamentals."
No doubt progress will be more rapid and superior designs will be produced as we more clearly comprehend the fundamental nature of failure under each of the various methods
of loading. It is hoped that the following discussion of surface weakness will help in some small measure toward a more complete understanding of problems associated with
strength of materials including the role, for good or for evil, that is played by manufacturing processes.
Download full text pdf file
www.shotpeener.com
This page last revised: 04/24/2008