Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: The Effect Of Shot Peening To Decarburized Spring Steel Plate
Author: Sato, Inoue, Ohno
Source: Conf Proc: ICSP-1, (p.303-312)
Publication year 1981
Document number: 1981071
Number of pages: 10
Abstract:
Results on the relation between decarburization and the effect of shot peening are presented. An appropriate shot-peening condition for decarburized SUP6 (Si--Mn steel)
spring steel plate is proposed. The fatigue life can be increased by applying shot peening twice under the following conditions: 0.7 mm steel-shot -> 0.4 mm cut-wire and
0.7 mm steel-shot -> glass-beads (wet honing). Even under these shot-peening conditions, it was noted that there was no difference in the fatigue life under the
conventional shot-peening conditions when the decarburized layer was > 0.l5 mm.
Descriptors: Spring steels-- Mechanical properties; Decarburizing; Shot peening; Fatigue life; Roughness
Download full text pdf file
www.shotpeener.com
This page last revised: 04/24/2008