Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: The Effect Of Inherent Tolerances In The Almen Test Strip On Shot Peening Process Reliability
Author: Simpson, Clark, Chiasson
Source: Conf Proc: ICSP-3, (p.101-107)
Publication year 1987
Document number: 1987095
Number of pages: 7
Abstract:
Defining current allowable tolerances for Almen Test Strips per applicable U.S. Military and industry specifications, and how they affect shot peening process reliability
and reproducibility, is the purpose of this paper.
T
he Almen strip has historically been and currently is the only
available non-destructive measurement instrument utilized to represent the amount of aggregate energy transfer to a workpiece resulting from the shot peening process. Since
there is currently no available means of shot peen process non-destructive test performed directly on a workpiece, the importance of the almen strip continues to remain
high.
A
n area of much recent discussion in technical circles concerned with
the shot peening process has been what quantitative and qualitative information the Almen strip can provide, and what it can and cannot measure in terms of process
effectiveness. While important, there is another concept which needs considerably more definition than is currently available in technical literature. This is Almen test
strip reliability and succinct quantitative definition of how reliably the Almen strip, as currently specified in applicable U.S. Military and industry specifications.
A
s in any process measurement, the cumulative acceptable tolerances of
gauges and measurement instruments are of critical importance. Commonly specified production Almen intensity ranges are +/- 2A. Not uncommon is +/- 1A. During research
conducted by the authors, several phenomena associated with the Almen strip have been identified as affecting its capacity to reliably measure processes specified to a +/-
2A or smaller intensity range.
Download full text pdf file
www.shotpeener.com
This page last revised: 03/04/2009