Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Shot Peening Specification BAC 5730 - Rev M
Author: Boeing Commercial Airplane Co.
Source: BAC 5730, Rev. M 3-25-92
Publication year 1992
Document number: 1992006
Number of pages: 31
Abstract:
(a) This specification establishes the requirements for compression shot peening of metal parts using metallic shot for the purposes of increasing fatigue life and
inhibiting stress corrosion cracking. (b) This specification establishes requirements similar to MIL-S-13165, AMS 2430 and AMS 2432. (c) Other processes meeting the
requirements of MIL-S-13165, AMS 2430 or AMS 2432 shall not be used in liew of this specification. (d) This specification forms a part of BAC 5730-1 and BAC 5730-2. When no
method is called out on the engineering drawing this specification shall apply. When specified, the dash numbered specification takes precedence over this specification.
(e) This specification rquires certified personnel.
This article not available
www.shotpeener.com
This page last revised: 04/24/2008