Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: The Shot Peening in the Closed Metallic Chamber
Author: Salko Djozic, B Sc
Source: Conf Proc: ICSP-7 (pg 400-404)
Publication year 1999
Document number: 1999054
Number of pages: 5
Abstract:
At which way will be performed the Shot Peening Process is presented on the sketch freely designed. By electric motor is drived whole process in this small space protected
by metallic shell. Two driving gears doing the rotative motion. Main thing is provided by SNAIL TRANSFER special fabricated for horizontal movement - left - right.
Electric motor work going normal others motors except something additional attached - connected THYRISTORS for exact change sense of motor rotation. Item to be treated can
be fixed with lower shaft drived by gear. It is fixed by two flanges on the left - right side with flanges and bolts. That means this axle is removable - down to make
space for further process of Shot Peening. Flexible elastic pipes connected with moving box of Snail Transfer. As well in this area is very important system lubrication,
dust removing by suction and protection of becoming dust. Whole device can be very small and can brought by hands depending of user wishes scientific research laboratory or
Workshop in manufacturing process.
Download full text pdf file
www.shotpeener.com
This page last revised: 04/24/2008