Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Thermomechanical Surface Treatment Of Quenched And Tempered Sae 1045: A Method To Improve Fatigue Life & Strength
Author: A. Cherif, B. Scholtes
Source: Conf Proc: ICSP-10 Tokyo, Japan 2008
Publication year 2008
Document number: 2008084
Number of pages: 6
Abstract:
ABSTRACT
Thermomechanical surface treatments such as high-temperature deep rolling and deep rolling with consecutive annealing were developed from conventional surface treatment
(deep rolling). The fatigue behaviour of thermomechanically treated quenched and tempered SAE 1045 was investigated using stress-controlled fatigue tests and compared with
conventionally deep-rolled conditions (deep rolled at room temperature). Residual stress and work-hardening effects in the modified surface layer before and after the
fatigue tests were investigated using X-ray diffraction methods.
KEY WORDS
Fatigue, thermomechanical surface treatment, deep rolling, residual stress
This ICSP paper is not available until September of 2011. You may purchase the complete conference procedings ICSP-10 for $230 at Electronics Inc +1-574-256-5001
www.shotpeener.com
This page last revised: 03/22/2010