Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Present Status Of Shot Peening Machine In Auto Parts Processing Lines In Japan
Author: T. Oyama
Source: Conf Proc: ICSP-10 Tokyo, Japan 2008
Publication year 2008
Document number: 2008110
Number of pages: 6
Abstract:
ABSTRACT
In common manufacturing process of automotive gears, shot peening is set up between hardening process and final grinding process. As the purpose of shot peening is surface
modification, the machine is commonly found in the same area with heat treatment equipments.In recent years, particularly in some production line for small size gears for
automotive transmission, the peening machine is often installed at the first process of machining line right after the heat treatment. In other words, the location of
machine is changed from heat treatment plant to machine shop. Due to this trend, the installation space allocated to the peening machine is getting tighter. In response to
this demand, the construction of shot peening machine of compact shape to fit to the machining line and the method of controlling various elements related to the peening
intensity in actual machine are introduced in this paper.
KEY WORDS
.. Shot Peening machine
.. Space Saving Equipment
.. Peening Treatment Conditions
.. Experimental Proof Test
This ICSP paper is not available until September of 2011. You may purchase the complete conference procedings ICSP-10 for $230 at Electronics Inc +1-574-256-5001
www.shotpeener.com
This page last revised: 03/22/2010