Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Effect Of Shot Peening On Fine Grain Steel
Author: K. Seki, M. Hashimoto, M. Gotoh, H. Hirose
Source: Conf Proc: ICSP-10 Tokyo, Japan 2008
Publication year 2008
Document number: 2008114
Number of pages: 6
Abstract:
ABSTRACT Recently, the improvement of the high strength of fine grain steels has been investigated actively. In the present study, interior and surface residual stress
distributions in fine grain steel after shot peening were measured by X-ray diffraction. Moreover, the hardening effect near the shot peened surface was also examined. The
relationships between the hardening effects of shot peening and the grain size of material are discussed. It is found that both the initial hardness before shot peening and
the mean grain size of the sample had an influence on the distributions of the hardness and the residual stress.
KEY WORDS Fine Grain Steel, X-ray, Residual Stress, FWHM, Hardness
This ICSP paper is not available until September of 2011. You may purchase the complete conference procedings ICSP-10 for $230 at Electronics Inc +1-574-256-5001
www.shotpeener.com
This page last revised: 03/22/2010