Electronics Incorporated - The Shot Peener - Shot Peening Library
Title: Investigation of a Shot Peened Turbine Blade after Long-Term Use
Author: J.Jung, H.Lee, W.Lee, Kim, N.Jung
Source: Conf Proc: ICSP-10 Tokyo, Japan 2008
Publication year 2008
Document number: 2008126
Number of pages: 5
Abstract:
ABSTRACT The main application of shot peening technology is the increase of fatigue strength by generating residual compressive stress. We wondered about the long-term
durability of this effect under operating environments. So the shot peened turbine blade which was used for long term was investigated. The surface and cross-sectional micro
structure were examined by scanning electron microscopy. Also the surface roughness and the depth profiles of peened area were measured. The peening marks were found on the
surface. The deformed micro structure appeared as curved lath-martensite near the surface of the cross section. Lastly, the hardening layer due to shot peeing was an about
70 . thick. KEY WORDS Turbine blade, long-term use, power plant
This ICSP paper is not available until September of 2011. You may purchase the complete conference procedings ICSP-10 for $230 at Electronics Inc +1-574-256-5001
www.shotpeener.com
This page last revised: 03/22/2010