Previous Thread
Next Thread
Print Thread
Joined: Sep 2016
Posts: 4
E
Member
OP Offline
Member
E
Joined: Sep 2016
Posts: 4
I would like to know if it is necessary has instrumentation for measuring the media flow rate to qualify the process under the spec AMS 2430? If so what is the instrumentation needed for it. the media used is glass bead.

Thanks in advance.

Joined: Apr 2019
Posts: 18
R
Member
Offline
Member
R
Joined: Apr 2019
Posts: 18
I am still new at this but I had the same question and found out that it was either do a manual calculation with pounds per minute or obtain a Magna Valve. So, I guess technically the Magna Valve is the answer.

Joined: Apr 1999
Posts: 341
Likes: 1
J
Member
Offline
Member
J
Joined: Apr 1999
Posts: 341
Likes: 1
Manual means may be used for some applications but a better approach is to use a media flow control system.
We have MagnaValves for both ferrous and non-ferrous media.


Link Copied to Clipboard
Sponsored by Electronics Inc. © 2024 Electronics Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5