Previous Thread
Next Thread
Print Thread
#1284 04/27/17 03:30 PM
Joined: Apr 2017
Posts: 2
E
ewl17 Offline OP
Member
OP Offline
Member
E
Joined: Apr 2017
Posts: 2
I'm studying the possibility of installing a magnavalve (700-24) for glass bead shot peening but I have no experience with this product. Usually we use a manual valve and we do some frequent catch tests to verify the flow rate used for saturation almen curves and almen tests.
Does someone have some experience this kind of valve to control the glass bead flowrate for the peening process?
Thank you

Joined: Dec 2009
Posts: 2
J
Member
Offline
Member
J
Joined: Dec 2009
Posts: 2
We do have a valve that will control the flow rate of glass bead but it will depend on the flow rate you need.

Please contact Mark Ingram at 574-256-5001 or email him at [email protected]

He will be able to give you all the information that you need.

Thanks,
Jeff

Joined: Apr 2017
Posts: 2
E
ewl17 Offline OP
Member
OP Offline
Member
E
Joined: Apr 2017
Posts: 2
Thank you Jeff!
I'll contact him smile


Link Copied to Clipboard
Sponsored by Electronics Inc. © 2024 Electronics Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5