Register Log In

Home Forums General Discussion Shot Peening Process, Intensity, Coverage Peener needed in CT or CO

Print Thread

Peener needed in CT or CO #54 01/17/09 06:07 AM
Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U... T Thylacine Cycles OP Member
OP Thylacine Cycles Member T Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U...	Hi guys, I'm looking for a shot peener used to doing extremely thin walled micro-alloyed steel and Titanium tubing, such as those used in high end bicycle frames. Wall thicknesses generally range from 0.4mm to 0.9mm. Can anyone recommend anyone? Cheers, Warwick

Re: Peener needed in CT or CO #55 01/17/09 04:38 PM
Joined: May 1999 Posts: 200 East Hartford, CT, USA Walter Member
Walter Member Joined: May 1999 Posts: 200 East Hartford, CT, USA	We have expreinace with Cannondadle before they went bankrupt a few years ago. visit us on the web at www.peeningtechnologies.com -Walter Beach

Re: Peener needed in CT or CO #56 01/17/09 09:25 PM
Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U... T Thylacine Cycles OP Member
OP Thylacine Cycles Member T Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U...	Probably a moot point, but Cannondale is still happily selling bikes worldwide. What exactly were you doing for them?

Re: Peener needed in CT or CO #57 01/19/09 02:47 AM
Joined: May 2005 Posts: 2 Burlington, Ontario, Canada R Ron Wright Member
Ron Wright Member R Joined: May 2005 Posts: 2 Burlington, Ontario, Canada	Wheelabrator provides Air & Airless Controlled Shot Peening equipment worldwide. Visit us at www.wheelabratorgroup.com Ron Wright Ron Wright, Wheelabrator Peening Products [email protected]

Re: Peener needed in CT or CO #58 01/19/09 10:28 PM
Joined: May 1999 Posts: 200 East Hartford, CT, USA Walter Member
Walter Member Joined: May 1999 Posts: 200 East Hartford, CT, USA	Mostly ATV's which is what got them into trouble in the first place.

Re: Peener needed in CT or CO #59 01/19/09 11:19 PM
Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U... T Thylacine Cycles OP Member
OP Thylacine Cycles Member T Joined: Sep 2006 Posts: 4 Melbourne AU / San Francisco U...	Ah yeah, they did over extend themselves trying to make a dirt bike from scratch. Ron, I'm not looking to buy equipment, I'm looking for someone to carry out the work. Cheers, W

Moderated by Andy Levers, Dave Barkley, Jack Champaigne, Jeff Derda, John Cammett, Kumar Balan, Socrates, Walter

Link Copied to Clipboard

Sponsored by Electronics Inc. © 2025 Electronics Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.7.5