Home Forums General Discussion Shot Peening Process, Intensity, Coverage Conditioning New Cast Steel Shot

Print Thread

Re: Conditioning New Cast Steel Shot #11 04/09/10 09:10 PM
Joined: May 1999 Posts: 199 East Hartford, CT, USA Walter Member
Walter Member Joined: May 1999 Posts: 199 East Hartford, CT, USA	Is your air pressure tolerance really +/- 10 PSI? If so that may very well be your problem. I would suggest you change your air pressure limits to +/-10% from nominal across the board on all your machines.

Entire Thread
Subject	Posted By	Posted
Conditioning New Cast Steel Shot	Gary J	04/07/10 06:50 PM
Re: Conditioning New Cast Steel Shot	Lennart Almqvist	04/08/10 01:46 PM
Re: Conditioning New Cast Steel Shot	Walter	04/08/10 02:00 PM
Re: Conditioning New Cast Steel Shot	Gary J	04/08/10 06:57 PM
Re: Conditioning New Cast Steel Shot	Pete Bailey	04/08/10 07:21 PM
Re: Conditioning New Cast Steel Shot	Walter	04/08/10 08:24 PM
Re: Conditioning New Cast Steel Shot	Socrates	04/08/10 08:46 PM
Re: Conditioning New Cast Steel Shot	Joe McGreal	04/08/10 08:55 PM
Re: Conditioning New Cast Steel Shot	Gary J	04/09/10 06:41 PM
Re: Conditioning New Cast Steel Shot	Walter	04/09/10 08:51 PM
Re: Conditioning New Cast Steel Shot	Walter	04/09/10 09:10 PM
Re: Conditioning New Cast Steel Shot	Joe McGreal	04/12/10 01:39 PM
Re: Conditioning New Cast Steel Shot	Alberto Rodriguez	04/12/10 03:29 PM
Re: Conditioning New Cast Steel Shot	Gary J	04/13/10 06:59 PM
Re: Conditioning New Cast Steel Shot	Marcel vW	07/05/10 02:36 PM

Link Copied to Clipboard