Register Log In

Home Forums General Discussion Specifications AMS-S-13165A is out!

Print Thread

Re: AMS-S-13165A is out! #455 03/11/08 08:05 PM
Joined: Mar 2008 Posts: 6 Kent, WA W Wayne Hale Member
Wayne Hale Member W Joined: Mar 2008 Posts: 6 Kent, WA	Paragraph 3.2.1.2 of AMS2430 appears to NOT allow the use of manual peening for areas that cannot be reached by an auto peener. Is this the case? Manual peening is not allowed per this spec? What about any areas that you cannot reach with automatic machines?

Entire Thread
Subject	Posted By	Posted
AMS-S-13165A is out!	Walter	01/07/08 07:30 PM
Re: AMS-S-13165A is out!	Jack Champaigne	02/19/08 02:30 PM
Re: AMS-S-13165A is out!	DavidP	02/21/08 05:36 PM
Re: AMS-S-13165A is out!	Wayne Hale	03/11/08 08:05 PM
Re: AMS-S-13165A is out!	Jack Champaigne	03/11/08 09:40 PM
Re: AMS-S-13165A is out!	Wayne Hale	03/12/08 01:20 PM
Re: AMS-S-13165A is out!	Walter	03/12/08 01:48 PM
Re: AMS-S-13165A is out!	Wayne Hale	03/12/08 02:59 PM
Re: AMS-S-13165A is out!	Walter	03/12/08 04:00 PM
Re: AMS-S-13165A is out!	Wayne Hale	03/12/08 05:05 PM
Re: AMS-S-13165A is out!	Walter	03/12/08 05:57 PM
Re: AMS-S-13165A is out!	Wayne Hale	03/12/08 07:37 PM
Re: AMS-S-13165A is out!	Walter	03/12/08 07:52 PM
Re: AMS-S-13165A is out!	DavidP	03/13/08 12:36 PM

Moderated by Andy Levers, Dave Barkley, Jack Champaigne, Jeff Derda, John Cammett, Kumar Balan, Socrates, Walter

Link Copied to Clipboard

Sponsored by Electronics Inc. © 2024 Electronics Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.7.5