Home Forums General Discussion Specifications Intensity: AMS 2430 rev S vs. SAE J443 rev 2010

Print Thread

Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010 Dennis #957 12/17/12 02:47 PM
Joined: May 1999 Posts: 199 East Hartford, CT, USA Walter Member
Walter Member Joined: May 1999 Posts: 199 East Hartford, CT, USA	I would say that for now you will have to live to the AMS 2430 requirement whereas the intensity verification readings must be within the b/p specified range. I too believe that section 3.10.2 should be removed from AMS 2430 as it conflicts with J443 and has no purpose.

Entire Thread
Subject	Posted By	Posted
Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Dennis	12/17/12 02:31 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Walter	12/17/12 02:47 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Jack Champaigne	12/18/12 01:59 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Lambertp	02/12/13 02:39 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Walter	02/12/13 02:54 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Jack Champaigne	02/12/13 02:58 PM

Link Copied to Clipboard