Register Log In

Home Forums General Discussion Specifications Intensity: AMS 2430 rev S vs. SAE J443 rev 2010

Print Thread

Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010 Dennis #962 02/12/13 02:39 PM
Joined: Feb 2013 Posts: 1 L Lambertp Member
Lambertp Member L Joined: Feb 2013 Posts: 1	Something new on this topic (AMS.2430 rev S) ? The intensity verification at +-0.0015 inch is required, it seems that this requirement within intensity range of the part is not acceptable due to the peening porcess reproducibility ? Thanks to light my understanding

Entire Thread
Subject	Posted By	Posted
Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Dennis	12/17/12 02:31 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Walter	12/17/12 02:47 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Jack Champaigne	12/18/12 01:59 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Lambertp	02/12/13 02:39 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Walter	02/12/13 02:54 PM
Re: Intensity: AMS 2430 rev S vs. SAE J443 rev 2010	Jack Champaigne	02/12/13 02:58 PM

Moderated by Andy Levers, Dave Barkley, Jack Champaigne, Jeff Derda, John Cammett, Kumar Balan, Socrates, Walter

Link Copied to Clipboard

Sponsored by Electronics Inc. © 2024 Electronics Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.7.5