Effect Of Shot Peening On Pool Boiling Heat Transfer Of Non Ferrous Alloys
Author: Sharma, M.C. and Mubeen, A.
Source: Conf Proc: ICSP-2, (p.259-265)
Doc ID: 1984015
Year of Publication: 1984
Abstract:
Pool boiling heat transfer coefficient has been found to improve by 12 to 33% in case of cupro nickel tubes after the outer surface was peened with C.I. grits of G-25 size. Similar treatment on admiralty brass tube resulted improvement of heat transfer coefficient of 11 to 32%. Peening treatment on the surface of condenser tube, thus, shows a good promise for increasing heat transfer coefficients.
Descriptors: Pool boiling; Heat transfer coefficient; Heat flux; Shot/grit peening
| Download PDF |
---|