Shot Peening Solution for Larger Quantities of Aircraft Constructible Parts
Author: Aljaž Molek | FerroECOBlast Europe
Source: The Shot Peener magazine, Vol 36, Issue 2, Spring 2022
Doc ID: 2022017
Year of Publication: 2022
Abstract:
SHOT PEENING technology is an important process,
especially in the aerospace industry, where there is no room
for error. It requires careful monitoring of all parameters
that impact the work process and consequently the final
result of the shot peening itself. This is why this process is
usually performed on an individual workpiece so as to allow
the process to be tracked for each product based on serial
number.
But what about products that are installed in an airplane
or in other machines in larger quantities? Or products of larger
dimensions? For such products, conventional machines are
not suitable or do not have a large enough capacity to meet
production needs. Multiple machines are needed in such
cases, which typically entails high investment costs.
| Download PDF |
---|