The 5th China National Conference and International Seminar on Shot-Peening Technologies and the 2nd China National Conference on Abrasives and Shot Media
(Conference Summary)
The 5th China National Conference and International Seminar on Shot-Peening Technologies and the 2nd China National Conference on Abrasives and Shot Media were held in Shanghai, China from June 11th to 14th, 2018. The conference is organized by the Failure Analysis Branch and the Materials Branch of the Chinese Society of Mechanical Engineering, along with host organizations Shanghai Jiao Tong University and Shanghai Liangshi Intel-robot Technology Corporation. Two- hundred and thirty-three participants representing 107 organizations from around the world attended the conference. At the conference, the participants submitted 92 papers, and presented 66 studies.
The opening ceremony was presided by professor Chuanhai Jiang, who is the deputy chairman of the professional committee. After briefly reporting on the preparatory process of the conference, professor Kewei Xu, chairman of the committee, gave a congratulatory message. After the congratulatory message, Professor Aidang Shan (secretary of the party committee of the School of Materials Science and Engineering at Shanghai Jiaotong university) and Zhenqi Zhang (chief engineer at Shanghai Liangshi Intelrobot Technology Corporation) spoke to provide a warm welcome to the delegates attending the conference Also at the opening ceremony, Dr. Abbas Nikulari, honorary member of the international pelleting academic committee for life, introduced new technologies and developments in the international field of shot peening technology, which proved to be extremely valuable for the delegates attending the conference. After the briefing by Dr. Nikulari, Kelin Feng, senior researcher of Taiwan institute of industrial technology, introduced the present situation of shot peening technology in Taiwan. Xinbo Wang, new secretary general of Abrasives and Shot Media Committee, introduced the conference to the newly inducted members of the Shot-Peening Technologies and Abrasives & Shot Media committee. To conclude the opening ceremony, Professor Zheng Zhang, secretary general of the Failure Analysis Branch of the Chinese Society of Mechanical Engineering, fully affirmed the achievements of the committee and putted forward higher expectations for future.
After the opening ceremony, all the representatives took a group photo. The conference focused on the following topics: (1) Conventional stress strengthening technologies such as shot peening and shot blasting, ultrasonic peening, grinding and rolling; (2) New surface strengthening technologies such as laser peening, liquid shot-peening and composite shot-peening; (3) Residual stress fields induced by shot peening and characterization of deformed structure; (4) Influence of shot peening on fatigue properties and stress corrosion resistance; (5) Shot peening forming technologies; (6) Theoretical analysis and digital simulation of shot peening process; (7) Shot peening strengthening and failure prevention of mechanical parts; (8) Advanced shot peening equipment and their applications; (9) New abrasives and shot media and their applications; (10) Residual stress measurement and analysis technologies.
During the conference, experts and scholars gave wonderful special reports, and the representatives all claimed to have had a wonderful experience. One notable aspect of the conference is the number of high-caliber young researchers that took part in the academic discourse to make their personal statements at the meeting. All representatives sincerely hoped that the senior experts and scholars will continue to pay attention to and guide the research and applications of shot peening technology, to ensure the sustainable development of shot peening technology in China.
A meeting of all members and senior members of the committee was held to determine the direction and objectives for the works in next two years. In addition, the general election of the committee was carried out, and the results of the election, naming the honorary chairman, chairman, vice chairman, secretary general, deputy secretary general and members are attached to this document. The 6thChina National Conference and International Seminar on Shot-Peening Technologies and the 3nd China National Conference on Abrasives and Shot Media will be held in 2020. The location and the organizer of the next committee will be determined after full consultation, investigation and careful consideration,
Thanks to the organizers of the conference, Shanghai Jiao Tong University & Shanghai Liangshi Intelrobot Technology Corporation, and all the companies and organizations for their great supports and hard works.
Members of Shot Peening Technology Committee
Honorary Chairman:Renzhi Wang
Chairman: Kewei Xu
Vice Chairman:Vincent Ji, Chuanhai Jiang, Kelin Feng,Yuansong Zeng,Zhongwei Liu
Secretary General:Xiaohu Chen
Deputy Secretary General:Aixin Feng, Ke Zhan, Haibin Pan
Committee Members (in alphabetical order): LiFeng Ding, Yunsheng Guo, Chao Han, Qingyou Han, Bolin He, Yongxiang Hu, Ding Li, Runzhe Li, Binghui Lin,Jianmin Ling,Daoxin Liu, Hongbing Liu, Ruwei Liu, Lijun Liu,Jinsheng Lu,Liantao Lu, Hongyan Miao, Jilai Ru, Liang Tang, Ridong Wang, Qi Wang, Xin Wang, Yadong Wang, Xinbo Wang, Zhou Wang, Chengmin Wu, Qing Yang, Zheng Yang, Wenhai Ye,Jun Zhang,Xinhua Zhang, Yunxiao Zhang, Xiaohong Zheng, Shikun Zou
Senior members: Jiawen He, KemaoLv, Qifang Ran, Yuxing Yang, Dingquan Zhang
Members of Abrasives and Shot Media Committee
Honorary Chairman:Renzhi Wang
Chairman: Kewei Xu
Vice Chairman:Vincent Ji, Chuanhai Jiang, Ruwei Liu, YongzhenZhai, Qi Wang
Secretary General:Xinbo Wang
Deputy Secretary General:Ke Zhan, Yuantao Zhao, Haibin Pan
Committee Members (in alphabetical order): Xiaohu Chen, Aidong Fei, Jianhua Fu, Zhiwei Gai, Chao Han, Zhibin Hou, Binghui Lin, Jianmin Ling，Daoxin Liu, Feng Qiu, Liang Tang, Ri dong Wang, Shouren Wang, Xin Wang, Xinhui Wang, Yadong Wang, Yulin Wang, Zhou Wang, Hua Xiao, ChunhaiXie, Zheng Yang, Wenhai Ye, Yunxiao Zhang, Liying Zhou
Senior members: Jiawen He, KemaoLv, Qifang Ran, Yuxing Yang, Dingquan Zhang
Organizers:
The Failure Analysis Branch, Chinese Society of Mechanical Engineering
The Materials Branch, Chinese Society of Mechanical Engineering
Hosts:
Shanghai Jiao Tong University
Shanghai LiangshiIntelrobot Technology Corporation